第32届国际塑料橡胶工业展精品——LVT软质复合地板
2018/4/30 10:20:05 点击：
第32届国际塑料橡胶工业展精品——LVT软质复合地板
LVT软质复合地板由挤出机挤出地板基材，再经过一套六辊复合机对基材与印刷层，耐磨层，防滑层进行同时复合，通过对放卷张力，耐磨层预热的精确控制，达到放卷时不起皱，不收缩，不变形等效果，挤出复合生产效率高，产品质量稳定。LVT soft composite floor by extruder extrusion floor base material, then through a set of six roller for base material and printing layer composite machine, wear-resisting layer, layer of compound at the same time, through the rolling tension, wear-resisting layer accurate control of preheating, to put the volume not wrinkle, does not shrink, deformation, extrusion compound high production efficiency, product quality is stable.
LVT地板优点：
LVT地板优点：
1、绿色环保
Green and Environmental Protection
2、超轻超薄
Super light and thin
3、超强耐磨
Super wear-resistance
4、高弹性和超强抗冲击
High elasticity and super shock resistance
5、超强防滑
Super skid resistance
6、防火阻燃
Fireproof and flame resistance
7、防水防潮
Waterproof and moistureproof
8、裁剪拼接简单容易
Easy for cutting and splicing
9、安装施工快捷
Easy installation
10、可直接用于wpc地板表面贴合
Could laminate with WPC flooring directly
LVT软质复合地板生产线是常州金纬片板设备制造公司不断创新改进的产品，可以替代传统层压机的生产方式，该生产线可实现在线复合，在线压花，在线回火等功能，生产线具有占用场地小，生产效率高，操作简便等特点。
LVT cork composite flooring production line is developed by Changzhou Jwell Plate&Sheet Equipment Co.,LTD through continuous innovation, which could replace the production mode of traditional laminating machine. This production line has the function of on-line compositing, on-line embossing, on-line tempering, etc. This line has the advantage of small floor occupation, high production efficiency, easy operation, etc.
1. 在线挤出生产线：On-line extruding line:1.1 挤出机：SJZ80/156（电机功率75KW）
Extruder:SJZ80/156(Power 75KW)
1.2 生产线挤出产量：2600平方/天
Extrusion capacity:2600 square meters/day.
2. 模具：Mold:
2. 模具：Mold:2.1 模具采用阻流棒控制形式，可快速调节出料均匀
The mold controlled by flow resisting bar, which could ensure quick adjustment and output evenly.
2.2 上下模唇可微调，更好的控制产品厚度
Could fine tuning the upper and down mold lip to better control the product’s thickness.
3. 六辊复合成型机：Six-roller composite forming machine:
3.1 采用段复合设计，可以减少表面贴合材料的拉伸
Use section composite design, which could reduce the stretching of surface’s laminating material.
3.2 创新的加热过渡辊设计，可确保较厚耐磨层的复合强度
Innovative heating transitional roller could ensure the composition strength of thick wear-resisting layer.
3.3 压花辊的安装设计，压花效果好，更换花辊更方便
The good installation design of embossing roller could ensure the good effect of embossing and more convenience to change the roller.
4. 回火及吸水牵引机Tempering and water absorbing haul off unit.
4. 回火及吸水牵引机Tempering and water absorbing haul off unit.4.1 通过在线回火设计，可有效控制产品的平整度及收缩率
Through the on-line tempering design, could control the product’s flatness and shrinkage effectively.
4.2 吸水牵引机可有效去除制品表面的水份
Through the on-line tempering design, could control the product’s flatness and shrinkage effectively.
5. 自动定长剪板机Automatic length fixing cutter.
5.1 剪板机入口带辅助牵引设计，可更好控制剪板的稳定性
The entrance of cutter have the design of auxiliary haul off, that could better control the cutter board’s stability.
5.2 特殊的切割设计，可以最大限度的减少产品端面的毛边
The special design of cutting could reduce the burrs of product’s end face as much as possible.
5.3 产品的自动定长功能，方便人员操作，切割精度高
The function of automatic length fixing could be operated easily and have high cutting precision.
- 上一篇：第32届国际塑料橡胶工业展精品——全电动中空成型机（Full 2018/4/30
- 下一篇：洛氏硬度、布氏硬度等硬度对照表和换算方法 2015/5/2